Slab formwork

The BT20 ECO girder is a cost-effective, lightweight formwork solution with a solid web. Its low weight and chamfered ends make it easy to assemble and widely used on construction sites. The ideal solution for projects requiring strength, flexibility in use and an economic approach to investment.

A supplementary girder is a key structural element used to transfer loads between main girders. Its task is to strengthen and stabilize structures such as roofs, floors, or other load-bearing structures. By evenly distributing the load, it provides safe and durable support for the entire structure.

The Baudeck Drop Head enables earlier dismantling of Baudeck ceiling slabs, while maintaining the required support of the fresh ceiling slab. This is an ideal solution for contractors who want to complete formwork work faster without losing the stability of the structure.

The 7.5 kg HDG support tripod is an irreplaceable element used in system solutions for ceiling formwork. Its main task is to stabilize the supports during assembly and concreting work, which significantly increases the safety and comfort of work on the construction site.

The 5 kg EG support tripod is a practical and irreplaceable element used in system solutions for ceiling formwork. Its main task is to stabilize the supports during their assembly and during concreting work, which significantly increases the safety and efficiency of work on the construction site.

The head for H20 and BT20 girders is an irreplaceable element of the formwork system, which guarantees stability and safety during the assembly of ceilings. Thanks to the universal fork spacing, the head allows for the installation of one girders, and after rotating by 90° – two girders at the same time.

The cross angle head is a key element that stabilizes H20 girders in ceiling formwork systems. The product consists of a steel plate and a welded steel pipe , placed inside the support support. The design provides a secure and stable attachment of the girders, preventing them from moving and rotating. On the opposite side of...

The Light Cross Head is a basic and versatile component of formwork systems, designed to stabilize H20 girders. Made of high-quality galvanized steel, it guarantees durability and corrosion resistance, even in difficult conditions on the construction site.

The head placed in the support serves to safely support the Baudeck board. The Baudeck head is placed under the joint of the ceiling slabs. When fitting to the wall, the formwork boards are placed entirely on the Baudeck heads. the safe support of the Baudeck board. The Baudeck head is placed under the joint of the ceiling slabs. The head is galvanized, height 37 cm,...

The Baudeck head spacer is a functional accessory that allows precise positioning of 8 cm wide square timber in areas requiring supplementation. The product is compatible with both the Baudeck head and the Baudeck BHP head, making it a versatile element of formwork systems.

The Baudeck corner header is a practical solution that allows for the installation of formwork panels in the corners of rooms and directly next to walls. The product has been designed to facilitate precise adjustment of formwork in hard-to-reach places, making it an irreplaceable element of the Baudeck system.

The BHP Barrier Holder is a reliable solution for attaching BHP posts to Baudeck system panels. It is used as an alternative barrier method, especially in situations where it is not possible to use BHP heads or when the panels are cantilevered. The holder is mounted from the bottom of the panel, which provides additional stability and safety.

Used to connect Baudeck heads to Bauprop supports. We recommend Bauprop supports.

G-PIN for plumb supports is an indispensable element used in building structures, used for precise and safe plumb of supports. Made of high-quality steel, subjected to a galvanizing process, it guarantees not only exceptional durability, but also corrosion resistance, which is crucial in various working conditions.

Vertical supports are designed for rectifying wall and column formwork. They come in three sizes, making it easy to adjust the set of supports to the desired formwork height. The supports can work under compression and tension, so they only need to be used on one side of the formwork.

The ECOPROP nut and G-PIN are key elements of professional construction supports that provide precise adjustment and structural safety. Made of high-quality galvanized steel, these accessories are characterized by exceptional durability and corrosion resistance, even in difficult weather conditions.

The ECOPROP steel construction support is a modern solution designed to transfer vertical compressive loads in temporary ceiling supports and system beam formworks. Its solid construction and light weight make it an ideal choice for smaller constructions.

The ECOPROP steel construction support is a modern solution designed to transfer vertical compressive loads in temporary ceiling supports and system beam formworks. Its solid construction and light weight make it an ideal choice for smaller constructions.

The ECOPROP steel construction support is a modern solution designed to transfer vertical compressive loads in temporary ceiling supports and system beam formworks. Its solid construction and light weight make it an ideal choice for smaller constructions.